Pepper-computer Modular Computers RS485 Bedienungsanleitung PDF herunterladen (Seite 181)

SMART I/O User’s Manual

Chapter 5 Analog Modules

5.1.9 ISaGRAF Programming

5.1.9.1 The ISaGRAF Board Parameters

Information on board parameters may be found in the PEP online help and

ISaGRAF online help or user’s manual.

Figure 5.1.9.1.1 Typical Screen Sections for the SM-DAD1 Module

Logical Address

The 4 inputs and 2 outputs of this module may be clearly seen together with

the logical address at which this particular board is residing. Remember, this

logical address is the same as the physical slot position! In the example

shown here, the board being addressed is in slot 2 i.e. the second of the

SMART-BASE slots. Up to 11 slots are catered for in the SMART I/O

concept; 3 on the SMART-BASE and 2 for each connected SMART-EXT

(up to a total of 4).

Module Specific Information

UNIPOLAR_bipolar : Like all I/O board parameters, the default is

set in upper-case lettering. Here, in this

example both outputs of the module are set to

function in bipolar mode. Hardware jumpers

J4 and J5 must be set accordingly as it is

impossible under ISaGRAF to configure the

outputs

dua

1 2 ... 176 177 178 179 180 181 182 183 184 185 186 ... 319 320

Keine Kommentare

Pepper-computer Modular Computers RS485 Bedienungsanleitung Seite 181